Cleaning Silver With Aluminum Foil. How To Clean A Carb.
Cleaning Silver With Aluminum Foil
- Aluminium foil is aluminium prepared in thin metal leaves, with a thickness less than , although much thinner gauges down to 0.006 mm are commonly used. In the USA, foils are commonly gauged in mils. The foil is extremely pliable, and can be bent or wrapped around objects with ease.
- A thin gauge (.285-1.0 mil) aluminum foil laminated to plastic films to provide oxygen, aroma and water vapor barrier properties.
- make clean by removing dirt, filth, or unwanted substances from; "Clean the stove!"; "The dentist cleaned my teeth"
- Remove the innards of (fish or poultry) prior to cooking
- (clean) free from dirt or impurities; or having clean habits; "children with clean shining faces"; "clean white shirts"; "clean dishes"; "a spotlessly clean house"; "cats are clean animals"
- Make (something or someone) free of dirt, marks, or mess, esp. by washing, wiping, or brushing
- a soft white precious univalent metallic element having the highest electrical and thermal conductivity of any metal; occurs in argentite and in free form; used in coins and jewelry and tableware and photography
- (esp. of the moon) Give a silvery appearance to
- coat with a layer of silver or a silver amalgam; "silver the necklace"
- Provide (mirror glass) with a backing of a silver-colored material in order to make it reflective
Aluminum Foil - Something You May Not Know
...I decided to repost this handy kitchen household tip for those of my friends that missed it the first time around...I wonder how many of you are now using those tabs...lolololololol. Getting ready to go out for a bit...I'll visit your streams when we get back. I hope you're having a wonderful day, my friends. :~}
...a friend sent me this suggestion, and you know I just had to share it...hahahahah. :~}
I've been using aluminum foil for more years than I care to remember. Great stuff, but sometimes it can be a pain. You know, like when you are in the middle of doing something and you try to pull some foil out and the roll comes out of the box. Then you have to put the roll back in the box and start over.
The darn roll always comes out at the wrong time. Well, I would like to share this with you. Yesterday I went to throw out an empty Reynolds foil box and for some reason I turned it and looked at the end of the box. And written on the end it said, 'Press tab to lock end,' or 'Press to secure roll.' Right there on the end of the box is a tab to lock the roll in place. How long has this little locking tab been there? I then looked at a generic brand of aluminum foil and it had one too.
I then looked at a box of Saran wrap and it had one too! I can't count the number of times the Saran wrap roll has jumped out when I was trying to cover something up. I'm sharing this with everyone who didn't know this and those of you who already knew it. If you didn’t know this, e-mail me and let me know so I won’t feel so 'out of the loop.' I hope I'm not the only person that didn't know or had forgotten about this.
...rats...foiled again...lolololol...I hope your weekend is rolling right along, my friends. :~}
***an update...I just found out Reynolds has only been doing this since 1996...12 years...whew, and I thought I was tearing up my hands foolishly for longer...lolol. :~O
*** Thank you my friends...Explore #332 10/25/08 ***
When working on a circuit board, always make sure your soldering iron is clean as any random little drip of old solder that was stuck to the tip can cause shorts and headaches if it lands in the right (wrong) spot on the board. I clean mine with 220 grit sandpaper BEFORE plugging them in and then use aluminum foil to wipe off any residual solder after the iron has gotten hot. Soldering irons come with various sizes and shapes of tips- be sure you use one with a small, pinpoint tip such as the one in this picture. If you don't have one you can find them really cheap at places like Walmart or Home Depot. The one in the picture was around $5 and I've been using it for years. To solder these leads to the board, simply place the tip of your hot soldering iron onto the lead wire and apply slight pressure. The silver contact area under the wire is actually just a small pool of solder and it won't take more than 10 seconds for the wire to heat up and melt the solder below it.
how to clean a clothes dryer
cleaning equipment nc
how to clean tempered glass
cleaning bathtub grout
cleaning plastic blinds
history of teeth cleaning
cleaning off mold
lil wayne and lil chuckie too clean
best way to clean tile floors